2MP Low Light Smart Camera - DS-2CD6026FHWD-(A)

Brand:  Hikvision
Product Code:  DS-2CD6026FHWD-(A)
Availability:  10
0 reviews  (0 reviews)   |   Write a review

2.54cm(1/1.8”) Progressive Scan CMOS

Full HD1080p video

Up to 60fps frame rate

Ultra-low light

Slow shutter

120dB WDR

3D DNR

-A: Auto Back Focus

Audio/Alarm IO

Support 128G on-board storage

DC12V/AC24V/PoE

Camera :

Image Sensor : 2.54cm(1/1.8”) Progressive Scan CMOS

Min. Illumination : Color: 0.001 Lux @ (F1.2, AGC ON), B/W: 0.0001 Lux @ (F1.2, AGC ON)

Shutter Speed : 1s ~ 1/100,000s

Slow Shutter : Support

Lens Mount : C/CS mount

Auto-iris : DC drive

Day & Night : IR Cut Filter

WDR : 120dB

Focus : -A: support ABF

Compression Standard :

Video Compression : H.264/MPEG4/MJPEG

H.264 Type : Baseline Profile / Main Profile / High Profile

Video Bit Rate : 32 Kbps – 16 Mbps

Audio Compression : G.711/G.722.1/G.726/MP2L2

Audio Bit Rate : 64Kbps(G.711) / 16Kbps(G.722.1) / 16Kbps(G.726) / 32-128Kbps(MP2L2)

Image :

Max. Resolution : 1920 × 1080

Frame Rate : 50Hz: 50fps(1920 × 1080, 1280 × 960, 1280 × 720)60Hz: 60fps (1920 × 1080, 1280 × 960, 1280 × 720)

Third Stream : Independent with Main Stream and Sub Stream, up to 50Hz: 25fps(1920 × 1080); 60Hz: 30fps (1920 × 1080)

Image Enhancement : BLC/3D DNR/ROI/Defog/EIS

Image Setting : Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser

Regional Cropping : Support

Day/Night Switch : Auto/Schedule/Triggered by Alarm In

Picture Overlay : LOGO picture can be overlaid on video with 128x128 24 bit bmp format

Network :

Network Storage : NAS (Support NFS,SMB/CIFS), ANR

Alarm Trigger : Motion detection, Tampering alarm, Network disconnect, IP address conflict, Storage exception

Protocols : TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour

Security : User Authentication, Watermark, IP address filtering, Anonymous access

Standard : ONVIF(PROFILE S,PROFILE G), ISAPI

Interface :

Audio : 1-ch 3.5 mm audio in( Mic in/Line in)/out interface, 1 build-in Microphone

Communication Interface : 1 RJ45 10M/100M Ethernet port, 1 RS-485 interface and 1 RS-232 interface

Alarm : 1 input, 1 output (up to DC24V 1A or AC110V 500mA)

Video Output : 1Vp-p composite output (75 Ω/BNC)

On-board storage : Built-in Micro SD/SDHC/SDXC slot, up to 128 GB

Reset Button : Yes

Audio :

Environment Noise Filtering : Support

Audio I/O : Support dual audio track, stereo

Audio Sampling Rate : 16kHz / 32kHz / 44.1kHz / 48kHz

Smart Feature Set :

Behavior Analysis : Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal

Line Crossing Detection : Cross a pre-defined virtual line

Intrusion Detection : Enter and loiter in a pre-defined virtual region

Region Entrance : Enter a pre-defined virtual region from the outside place

Region Exiting : Exit from a pre-defined virtual region

Unattended Baggage : Objects left over in the pre-defined region such as the baggage, purse, dangerous materials

Object Removal : Objects removed from the pre-defined region, such as the exhibits on display.

Exception Detections : Scene change detection, Sudden audio increase/decrease detection, Audio loss detection, Defocus detection

Face Detection : Human face appears in the image can be detected and trigger linkage method

Statistics : Object Counting (Entrance and Exit object number is accounted and showed on screen in real time)

General :

Operating Conditions : -30 °C – 60 °C (-22 °F – 140 °F), Humidity 95% or less (non-condensing)

Power Supply : 24 V AC ± 10%, 12 V DC ± 10%, PoE (802.3af)

Power Consumption : Max. 6 W (Max. 9W with IR cut filter on)

Dimensions : 69.8×58×145 mm (6.98cm(2.75″) × 5.79cm(2.28”) × 14.50cm(5.71”))

Weight : 830 g (1.83 lbs)

Write a review

Your Name:
Your Review:
Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: